• Furutech FP-162 (Gold RCA Connectors)

    Price per pack (4 pieces)

    Free Delivery (West Malaysia Only)

     

    Gold High Performance Audio RCA Connectors

     

    Furutech FP-162 Gold High Performance Audio RCA Connectors is made from Eutectic cast copper body and locking collet with a Fluoropolymer insulation and uses α 24K Gold Eutectic cast copper α (Alpha) center pin.

     

    Specification:

    • Specified for cable diameters up to 7.3mm
    • Dimensions: 11.9mm ± 0.1 diameter x 37.3mm ± 0.1mm overall length
    • Connections: Soldered
    • 4 Pcs / Set
    • 2 Years Warranty
  • Furutech FI-11 (Cu) IEC

    Price per piece 

    Free Delivery (West Malaysia Only)

     

    Specification

    • Specified for cable diameters of 6.6mm to 16mm (With a longer screw up to 20mm)
    • Wire accommodation: Max 5.5 Square mm 10AWG
    • Dimensions: Body length 43.9mm x 39mm diameter x 76.8mm overall length
    • Rated: 15A/125V 10A/250V
    • 15A/125V 10A/250V
    • E JET:15PJET086
    • USL /CNL Listed:04CA26110
    • Unplated Phosphor bronze α (Alpha) Conductor
    • Earth (Ground) Jumper System
    • Nylon/fiberglass front body, polycarbonate shell
  • Furutech FI-11 M (Cu) US Power Plug

    Price per piece 

    Free Delivery (West Malaysia Only)

     

    Specification

    • Specified for cable diameters of 6.6mm to 16mm
    • Wire accommodation: Max 5.5 Square mm 10AWG
    • Dimensions: Body length 40.2mm x 39mm diameter x 73mm overall length
    • Rated: 15A/125V
    • PSE JET: 15PJET090
    • USL /CNL Listed: 04CA26110
    • Type: 2-pole+earth
    • α (Alpha)-Pure copper Conductor
    • Earth (Ground) Jumper System
    • Nylon/fiberglass front body
    • Polycarbonate shell
  • Furutech TF-8A 20mm

    Price per piece 

    Free Delivery (West Malaysia Only)

     

    High End Performance Fuse

    Rating
    Furutech Select Series Pure Transmission Fuses
    20mm Nonmagnetic Time-lag Fuses

    Features
    Material: Copper Caps with direct rhodium plating.
    Conductor: Special low induction copper alloy

    Audio connoisseurs know that all links in the signal path are as important as the next. Furutech engineers solutions that optimize every pathway and junction; any unaccounted for characteristic weakness (i.e., contact resistance, EMI-radiating junctions, RFI) diminishes performance as noise and distortion builds.
    Using the best materials and processes available along with meticulous attention to build quality is a large part of the Pure Transmission engineering equation: The fuse is equipped with rhodium-plated OFC copper caps and a special low-inductance copper alloy conductor, ceramic body with special damping filler.
    All metal parts treated with Furutech’s patented Alpha Super Cryogenic and Demagnetizing process. These beautifully made audiophile fuses are engineered to withstand 1 nanosecond at a full 1500 watts, and rated at 125mA/6.3A.

  • SVS Sound Path (4) (Subwoofer Isolation System)

    Price per Pack (4 pieces)

    Free Delivery (West Malaysia Only)

     

    Subwoofer Isolation System

    The SVS SoundPath Subwoofer Isolation System works with nearly every subwoofer brand and model to improve bass performance while reducing floor and wall vibrations, noise artifacts and complaints from neighbors or roommates. De-coupling a subwoofer from the floor results in inherently tighter and cleaner sounding bass. It’s also the next best thing to sound-proofing and ideal for carpeted rooms, hardwood floors or any space where room rattles, buzzes or vibrations are present.

    De-coupling

    Decoupling is making the interaction between a subwoofer and floor so weak that virtually no energy is transferred between them. The SVS SoundPath Subwoofer Isolation System features rigorously tested optimized durometer elastomer feet that significantly reduces the transmission of subwoofer energy through your floor and walls. This allows low frequency effects to be transferred through the air where they can be felt, resulting in tighter and cleaner sounding bass, no more distracting buzz or rattle from the room, and better sonic clarity and dynamics.

    The SVS SoundPath Subwoofer Isolation System feet come in a variety of thread sizes that easily screw into most subwoofer’s existing threaded inserts and subtly elevate the sub enclosure on a cushion of elastomer encased in stainless steel. The understated feet are a stylish, more effective alternative to bulky risers and platforms, at a fraction of the cost and also work with some turntables and other components.

  • Furutech 200B (Gold Banana Connector)

    Price per Pack (4 pieces) 

    Free Delivery (West Malaysia Only)

     

    Gold Banana Connector 

     

    A solid contact connection is critically important in an audio system. Furutech’s precision engineered audio grade banana plugs are made from some of the finest materials in the industry today. These audio grade banana plugs are made from non magnetic 24k Gold plated.

    Specification

    • Maximum Wire diameter: 5.0 mm
    • Dimensions: Housing—φ10.8 mm X 30 mm L
    • Dimensions: Banana Conductor—φ4.4 mm X 19.5 mm L
    • Overall length: 49.50 mm
    • FP-200B (G) 24k Gold Plated non-magnetic Conductor
    • Specially designed center pin for increased contact area and stable transmission
    • Unique set screw or solder wire setting for firm reliable connection
    • Material: Conductor central pin with 24k Gold Plated non-magnetic copper alloy, Housing with anti-oxidized Aluminum Alloy
  • Furutech FI UK 1363 (Cu) N1 (UK Power Plug)

    Price per piece 

    Free Delivery (West Malaysia Only)

     

    L-Shaped Angled High End Performance UK Main Plug

    This is a high end connector that is made from fireproof ABS body/housing and use (Alpha) Eutectic Copper alloy conductor.

    The plug is available in either Copper, 24k Gold-Plated or Rhodium-Plated.

    Specificationα (Alpha) Eutectic Copper Alloy ConductorMaterial: Fireproof ABS body/housing

    Accommodates cable diameters of 6.0mm to 16.0mm

    Dimensions: Body – 50.4mm (W) x 50.2mm (L) x 55.8mm (H) without cable clamp parts

    Rated: 13A Fused / 250V ACFI-1363-N1 -Unplated (treated with antioxidant)

  • ISO Acoustics ISO Puck

    Price per Box (2 pieces)

    Free Delivery (West Malaysia Only)

     

    Speaker isolators

     

    The IsoAcoustics ISO-PUCK Series provide an innovative new approach in isolating studio monitors, speakers and other systems. This unique patented design provides a high degree of isolation while resisting lateral movement and oscillations, which results in greater sound clarity and focus. This versatile isolation tool is possibly the most cost effective upgrade available for improving the performance and clarity of your speakers or monitors.

     

    SPECIFICATIONS

     

    Dimensions (WxDxH)

    2.4″x1.2″ (61x30mm)

    Weight Capacity

    20lbs (9kg) per unit​

    Quantity

    2 units per box​

  • SVS Sound Path (6) (Subwoofer Isolation System)

    Price per Pack (6 pieces)

    Free Delivery (West Malaysia Only)

     

    Subwoofer Isolation System

    The SVS SoundPath Subwoofer Isolation System works with nearly every subwoofer brand and model to improve bass performance while reducing floor and wall vibrations, noise artifacts and complaints from neighbors or roommates. De-coupling a subwoofer from the floor results in inherently tighter and cleaner sounding bass. It’s also the next best thing to sound-proofing and ideal for carpeted rooms, hardwood floors or any space where room rattles, buzzes or vibrations are present.

    De-coupling

    Decoupling is making the interaction between a subwoofer and floor so weak that virtually no energy is transferred between them. The SVS SoundPath Subwoofer Isolation System features rigorously tested optimized durometer elastomer feet that significantly reduces the transmission of subwoofer energy through your floor and walls. This allows low frequency effects to be transferred through the air where they can be felt, resulting in tighter and cleaner sounding bass, no more distracting buzz or rattle from the room, and better sonic clarity and dynamics.

    The SVS SoundPath Subwoofer Isolation System feet come in a variety of thread sizes that easily screw into most subwoofer’s existing threaded inserts and subtly elevate the sub enclosure on a cushion of elastomer encased in stainless steel. The understated feet are a stylish, more effective alternative to bulky risers and platforms, at a fraction of the cost and also work with some turntables and other components.

  • Furutech FP 202 (G) Gold Banana Connectors

    Price per Pack (4 pieces) 

    Free Delivery (West Malaysia Only)

     

    Gold High Performance Banana Connector 

     

    Gold High Performance Banana Connectors – Pack of 4

     

    Specification

    • Specified for wire diameters up to 5.5mm
    • Dimensions: 12mm diameter x 26.7mm ± 0.1mm (H) x 46mm overall length
    • FP-202 (G) 24k Gold-Plated
    • Eutectic cast copper alloy α (Alpha) pins
    • Connections: Set-screw
  • Furutech FP-601M Rhodium Male XLR

    Price per piece 

    Free Delivery (West Malaysia Only)

     

    High End Performance Male XLR Connector

     

    The Furutech FP-601M Rhodium High End Performance XLR Connector is made from Copper alloy body and PVDF Fluoropolymer insulation and use a Beryllium copper and phosphor bronze α (Alpha) Conductor.

     

    •  

      Specification

      • Specified for cable diameters up to 12mm
      • Dimensions: 19.5mm ± 0.1 diameter x 48.5mm ± 0.1mm overall length
      • Rhodium plated
      • 1pcs/set
      • Beryllium copper and phosphor bronze α (Alpha) Conductor
      • Copper alloy body and PVDF Fluoropolymer insulation
      • Connections: Soldered
  • Furutech FP-602F Rhodium Female XLR

    Price per piece 

    Free Delivery (West Malaysia Only)

     

    High End Performance Female XLR Connector

     

    The Furutech FP-602F Rhodium High End Performance XLR connector is made from Copper alloy body with PVDF Fluoropolymer insulation and use a Beryllium copper and phosphor bronze α (Alpha) Conductor.

     

    Specification

    • Specified for cable diameters up to 12mm
    • Rhodium-Plated
    • 1pcs/set
    • Dimensions: 19.5mm ± 0.1 diameter x 54.2mm ± 0.1mm overall length
    • Beryllium copper and phosphor bronze α (Alpha) Conductor
    • Copper alloy body with PVDF Fluoropolymer insulation
    • Connections: Soldered

     

  • Solid Tech Disc of Silence (Passive Isolator)

    Price per Pack (3 pieces)

    Free Delivery (West Malaysia Only)

     

    Passive isolator – Pack of 3 – Colour Silver

    The Discs of Silence passive isolator.
    88,48% reduction at 20Hz!

    The Discs of Silence is our workhorse isolator When we developed the Discs of Silence was our goal to create the most efficient and load capable isolator as possible without taking too much height in claims. It would also be height -adjustable and be adaptable to uneven loads.

    Enter the Discs of Silence!

    The Discs of Silence isolation-system consists of a cylindrically formed, sturdy and anodised Aluminum base, extension-springs, center-hub and a height-adjustable center-screw with a damping layer for mechanical coupling to the component..

    The equally simple as ingenious horizontal location of the extension-springs allows a large capacity without taking as much height in claims. When correctly loaded the operating height is 32-35mm. Correctly adapted and loaded is the resonance frequency well below 4Hz. Ensuring isolation even in the lowest and most degrading frequencies, resulting in much higher fidelity without tonal highlighting and masking such as more dynamic, cleaner transient response, wider and deeper soundstage, increased low level information, tighter bass and silkier highs.

    Optimized adaptation to a specific weight of each disc is obtained by adding the right number of springs, as well as the height adjustment of the center-screw.

  • Furutech FI UK 1363 NCF (R) – Rhodium Mains Plug)

    Price per piece 

    Free Delivery (West Malaysia Only)

     

    FURUTECH FI-1363 / FI-UK NCF (R) Rhodium Mains Plug

     

    SPECIFICATIONS

    • Rhodium – plated a (Alpha)Hybrid copper Conductor.
    • Body Material : Polycarbonate incorporating Furutech’s “NCF” Anti-resonance nano-sized crystalline ,piezo ceramic particles and carbon damping material.
    • Housing Material : Fireproof ABS body / housing (RoHS compliant)
    • Specifications : Accommodates cable diameter of 6.0mm to 20.0mm.
    • Dimensions :Body 48mm (W) x 50.2mm (L) X 55.8mm (H)
  • Furutech eTP60+GC-303 (Power Distributor / Filter)

    Price per piece 

    Free Delivery (West Malaysia Only)

     

    Power Distributor / Filter

     

    FEATURES

     

    The e-TP60 is a sophisticated, luxuriously made power distributor that eliminates many common problems found with audio and video components caused by massively contaminated electrical power.

    The AC waveform becomes severely distorted by ground noise, voltage spikes and sags,high frequency power supply noise from other components in your own system, Additionally, you’re never alone; your residential AC mains supply is shared with other apartments, homes, and businesses on the same utility transformer. That’s why many audio and video enthusiasts notice their systems are more enjoyable late at night or on weekends!

     

    The beautifully crafted special grade aluminum chassis effectively shields against another common problem, RFI (Radio Frequency Interference), and a layer of Formula GC-303 blocks EMI (Electro Magnetic Interference). Internal wiring is FURUTECH μ-14 wire(14 AWG) that guarantees low resistance.

    Furutech Hyper Quality High Performance Receptacles are wired to the IEC AC input of the e-TP60. Receptacles feature 24k gold-plated phosphor bronze, non-magnetic conductors for stable, long lasting, optimized power transfer.Furutech’s Two-Stage Cryogenic and Demagnetization Alpha ProcessThe 2-Step Cryogenic and Demagnetizing Alpha Process works in tandem with other design-in features to create the most optimized AC power transfer possible. It results in a greater sense of power, dynamics, and resolution, with cleaner, blacker backgrounds and a larger, more stable soundstage, The e-TP60 will allow the delicacy, refinement and nuance of a performance through, along with micro- and macro-dynamics that will leave you breathlessly engaged. Displays of all types will exhibit greater, sharper resolution with less ghosting, color shift, “snow”, or vertical and horizontal lines.

     

    SPECIFICATIONS

    ・VOLTAGE     AC 125V-250V 50/60Hz

    ・CURRENT    15A・Outlets6 Outlets

    ・DIMMENSIONS   200X130X60 mm

    ・WEIGHT        0.94Kgs

    ・Formula GC-303GC-303 (absorbs EMI)

  • ISO Acoustics Ghia I (Speaker Isolators)

    Price per Box (4 pieces)

    Free Delivery (West Malaysia Only)

     

    Speaker isolators

     

    GAIA I isolators provide improved sound clarity and openness for floor standing speakers and subwoofers weighing 220 lbs (100KG) or less.

    GAIA I isolators are finished with a machined stainless steel housing with an elegant dark chrome finish. Incorporating IsoAcoustics patented design principles, the GAIA I provides a high degree of isolation while resisting lateral movement and oscillations to maintain alignment with the listening position. Internal reflections from the hard-supporting surface are attenuated resulting in greater sound clarity and openness. The GAIA I will reveal clarity and openness from your speakers like you’ve never heard.

    The sound stage blossoms to open up a three-dimensional image of natural, spatial sound.

     

    SPECIFICATIONS

     

    Dimensions (W x H)

    2.5” x 1.9” (62mm x 49mm)

     

    Maximum weight

    220lbs (100kg) per set of 4

     

    Quantity

    4 per box

     

    Thread sizes included*

    M8-1.25, M12-1.25 and ¼”-20

Main Menu