-
KLIPSCH CS-18C (In-Ceiling Speaker)
In-Ceiling Speaker
Using the same design principles of our premium architectural and box speakerlines, the Klipsch Custom series delivers true Klipsch sound to any budget. The CS-18C features an 8” Polymer woofer and a 1” Polymer tweeter. Utilizing the SkyHook® patented Cinch by Swarm Installation System, your install time is reduced by 75%.
* Individual Price – Free Delivery (West Malaysia Only)RM615.00KLIPSCH CS-18C (In-Ceiling Speaker)
RM615.00 -
Audioquest Forest 48 HDMI Cable
Price per Piece – 2 metre
Free Delivery (West Malaysia Only)
Audioquest – Forest 48
8K.10K 48Gbps HDMI Cable
Sound first. While 8K and other compelling video/gaming features make the HDMI headlines, AudioQuest’s 48 and eARC-Priority Series HDMI cables are our best-sounding HDMI cables yet.
The greater precision and tighter manufacturing tolerances required to deliver HDMI cables that transfer up to 48Gbps bandwidth mean all of AudioQuest’s tried-and-true ingredients and techniques matter every bit as much as ever before.
Forest 48 features 0.5% Silver-Plated Copper conductors that have been direction-controlled for the most efficient dissipation of radio-frequency noise.48Gbps Bandwidth
AudioQuest “48” HDMI cables can transfer up to professional 10K Ultra-HD video. The 48Gbps bandwidth is made possible by 4 balanced audio/video pairs capable of 12Gbps each.
8K/10K
AudioQuest 48Gbps HDMI cables have the bandwidth required for video with resolutions up to 10K and resolutions/refresh rates up to 8K/60 and 4K/120. All AudioQuest HDMI cables are completely backwards compatible with existing 4K displays.
RM489.00Audioquest Forest 48 HDMI Cable
RM489.00 -
Audioquest NRG-Y3 Power Cord – US – 2m
Price per Piece – 2 metre
Free Delivery (West Malaysia Only)
AudioQuest – NRG-Y3 Power Cord (US)
Low-Distortion 3 Pole Power Cable
- Long-Grain Copper (LGC) and Silver-Plated Drain Wires
- Noise-Dissipation: Quiet Background and Minimal Circuit Misbehavior Due to Direction-Controlled Conductors and Shields
- ZERO Tech (No Characteristic Impedance) for Uncompressed Current Transfer
THE CHALLENGE: No matter how perfect an AC power source, distortion is added within any AC cable. Even the most sophisticated filters and power supplies cannot eliminate this Transient Intermodulation Distortion (TIM) as the induced RF noise modulates the low-level audio/video signal.
THE SOLUTION: NRG-Y3 cables use direction-controlled Long-Grain-Copper (LGC) strands in a Semi-Solid Concentric conductor arrangement in which strands are packed more tightly and never change position within the bundle. This construction significantly reduces strand interaction distortion. The greater purity and less complicated grain structure within LGC copper further reduces distortion.
In addition, NRG-Y3’s direction-controlled Silver-Plated shield conductors efficiently drain RF noise from the line and neutral shields to ground via the third “ground” pin. The net result is powerful, dynamic and immersive!
RM999.00 -
Audioquest NRG-Y3 Power Cord – UK – 2m
Price per Piece – 2 metre
Free Delivery (West Malaysia Only)
AudioQuest – NRG-Y3 Power Cord (UK)
Low-Distortion 3 Pole Power Cable
- Long-Grain Copper (LGC) and Silver-Plated Drain Wires
- Noise-Dissipation: Quiet Background and Minimal Circuit Misbehavior Due to Direction-Controlled Conductors and Shields
- ZERO Tech (No Characteristic Impedance) for Uncompressed Current Transfer
THE CHALLENGE: No matter how perfect an AC power source, distortion is added within any AC cable. Even the most sophisticated filters and power supplies cannot eliminate this Transient Intermodulation Distortion (TIM) as the induced RF noise modulates the low-level audio/video signal.
THE SOLUTION: NRG-Y3 cables use direction-controlled Long-Grain-Copper (LGC) strands in a Semi-Solid Concentric conductor arrangement in which strands are packed more tightly and never change position within the bundle. This construction significantly reduces strand interaction distortion. The greater purity and less complicated grain structure within LGC copper further reduces distortion.
In addition, NRG-Y3’s direction-controlled Silver-Plated shield conductors efficiently drain RF noise from the line and neutral shields to ground via the third “ground” pin. The net result is powerful, dynamic and immersive!
RM949.00 -
Audioquest NRG-X3 Power Cord – UK – 2m
Price per Piece – 2 metre
Free Delivery (West Malaysia Only)
AudioQuest – NRG-X3 Power Cord (UK)
AudioQuest’s award-winning NRG-X AC power cables were loved by many—experienced audiophiles and newcomers alike—for their unrivaled combination of performance and value. Compared to stock AC power cords or even premium cables at similar or higher prices, NRG-X cables have always delivered enhanced bass definition, improved transient articulation, greater soundstage scale, and more of the precious spatial cues that bring recorded music to life.
We are now delighted to offer the next generation of NRG-X AC cables, continuing the tradition of outstanding performance and exceptional value while complementing and enhancing today’s exciting electronics.
These new NRG-X Series power cables use Direction-Controlled Long-Grain Copper (LGC) in a Semi-Solid Concentric Topology—a sophisticated physical arrangement in which strands are packed more tightly and never change position within the bundle. Direction-Controlled LGC minimizes distortion caused by grain boundaries that exist in any metal conductor, which in turn assures induced noise is dissipated and drained properly—as always, we direct noise where it will do the least harm to your system’s performance.
While the earlier X cables had 37 strands in three layers over the single center strand, the new X-Series power cables have only seven larger strands comprising just a single uniform layer over a center strand. This refinement may sound simple, but the improved result is delightfully clear.
In addition, the 3-pole NRG-X3 is available with C13 and C5 female ends to accommodate a wide range of today’s new components.
Designed by AudioQuest to effectively lower noise in your audio/video system, our new X-Series power cables are true to music, allowing you to hear more of what’s on the recording. We invite you to experience the difference!
RM499.00 -
Audioquest NRG-X2 Power Cord – UK – 2m
Price per Piece – 2 metre
Free Delivery (West Malaysia Only)
AudioQuest – NRG-X2 Power Cord (UK)
AudioQuest’s award-winning NRG-X AC power cables were loved by many—experienced audiophiles and newcomers alike—for their unrivaled combination of performance and value. Compared to stock AC power cords or even premium cables at similar or higher prices, NRG-X cables have always delivered enhanced bass definition, improved transient articulation, greater soundstage scale, and more of the precious spatial cues that bring recorded music to life.
We are now delighted to offer the next generation of NRG-X AC cables, continuing the tradition of outstanding performance and exceptional value while complementing and enhancing today’s exciting electronics.
These new NRG-X Series power cables use Direction-Controlled Long-Grain Copper (LGC) in a Semi-Solid Concentric Topology—a sophisticated physical arrangement in which strands are packed more tightly and never change position within the bundle. Direction-Controlled LGC minimizes distortion caused by grain boundaries that exist in any metal conductor, which in turn assures induced noise is dissipated and drained properly—as always, we direct noise where it will do the least harm to your system’s performance.
While the earlier X cables had 37 strands in three layers over the single center strand, the new X-Series power cables have only seven larger strands comprising just a single uniform layer over a center strand. This refinement may sound simple, but the improved result is delightfully clear.
In addition, the 2-pole NRG-X2 uses our super-slim C7 female end to perfectly accommodate Sonos components, gaming consoles, and more.
RM399.00 -
Audioquest Type 5 Speaker Cable – 3m pair
Price per Pair – 3 metre
Free Delivery (West Malaysia Only)
AudioQuest – Type 5 Speaker Cable
Types 5 Low-Distortion & Low-Noise speaker cable is essentially Type 4 with better metal, and with conductors that are a little farther apart, reducing interaction between adjacent conductors by 35%.
Solid Perfect-Surface+ Sonic-Signature Conductors
Carbon-Loading and Direction-Controlled Conductors
Star-Quad GeometrySOLID PERFECT-SURFACE COPPER+/LONG-GRAIN COPPER SONIC-SIGNATURE CONDUCTORS
A finessed combination of grainless-sounding Perfect-Surface Copper+ Sonic-Signature conductors, plus Long-Grain Copper, enable a smooth and natural “lack-of-character.”
SOLID CONDUCTORS
Eliminate harshness and confusion due to strand-interaction.
NOISE-DISSIPATION
Carbon-Loading and Direction-Controlled conductors provide effective Noise-Dissipation, minimizing noise modulation and amplifier distortion.
STAR-QUAD GEOMETRY
Balanced Star-Quad Geometry reduces time-smearing while preserving dynamics, and clarity.
RM2,999.00Audioquest Type 5 Speaker Cable – 3m pair
RM2,999.00 -
Audioquest Black lab Subwoofer Interconnect Cable 3m
Price per Piece – 3 metre
Free Delivery (West Malaysia Only)
Audioquest – Evergreen
RCA-RCA Interlink Cable
Contrary to their name, Black Labs’ heritage actually traces back to Newfoundland in the 1700s, when they were first known as “Saint John’s Dogs.” When this large Newfoundlandbased breed was mixed with smaller water dogs, the result is the dog now known as the Labrador.
METAL-LAYER NOISE-DISSIPATION
It’s easy to accomplish 100% shield coverage. Preventing captured radio-frequency interference (RFI) from modulating the equipment’s ground reference requires AQ’s Noise-Dissipation. Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical “reference” ground plane, which in turn causes a distortion of the signal. Noise-Dissipation “shields the shield,” absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground.
SYMMETRICAL COAX GEOMETRY
COLD-WELDED, GOLD-PLATED TERMINATIONS
SOLID LONG-GRAIN COPPER (LGC) CONDUCTORS
FOAMED-POLYETHYLENE INSULATION
RM299.00 -
Audioquest Red River XLR Interconnect Cable 1.5m
Price per Pair – 1.5 metre
Free Delivery (West Malaysia Only)
Audioquest – Red River
XLR Interlink Cable
North America has two Red Rivers, North and South. Red River South has been home to many peoples; it once was the border between the US and colonial Spain, and today forms part of the border between the rival states of Texas and Oklahoma.
SOLID PERFECT-SURFACE COPPER (PSC) CONDUCTORS
Since the beginning, AudioQuest has pioneered the use of superior metals, yet even we were surprised by the huge leap in performance attained through the astonishingly smooth and pure surface of Perfect-Surface Copper (PSC). Proprietary metal-processing technology protects the wire’s surface at every stage of drawing and fabrication. When high-purity low-oxide copper is kept as soft, pure, and smooth as possible, it becomes a wonderfully low-distortion conductor. In a conventional cable, electrical and magnetic interaction between strands is one of the greatest sources of distortion, often causing a somewhat harsh, dirty sound. Solid conductors are fundamental toward achieving a very clean, natural sound.
MEMETAL-LAYER NOISE-DISSIPATIONTAL-LAYER NOISE-DISSIPATION
RM1,599.00 -
Audioquest Mackenzie XLR Interconnect Cable 1.5m
Price per Pair – 1.5 metre
Free Delivery (West Malaysia Only)
Audioquest – Mackenzie
XLR Interlink Cable – 1.5m
Originally named Disappointment for dashing Alexander Mackenzie’s hope that it would lead to the Pacific rather than the Arctic Ocean, the Mackenzie River is Canada’s largest, longest river system. Traversing 2,635 miles, it flows through a vast network of lakes, boreal forests and arctic tundra. Mackenzie’s many tributaries cover portions of three provinces—British Columbia, Alberta, and Saskatchewan
SOLID PERFECT-SURFACE COPPER+ (PSC+) CONDUCTORS
Solid conductors prevent electrical and magnetic strand-interaction. PSC+ Solid-Copper minimizes distortion caused by grain boundaries and maximizes linear RF Noise-Dissipation.
CARBON-BASED 3-LAYER NOISE-DISSIPATION SYSTEM (NDS)
TRIPLE-BALANCED GEOMETRY (SEPARATE GROUND-REFERENCE CONDUCTOR
COLD-WELDED, HANGING-SILVER DIRECTLY OVER PURE PURPLE COPPER TERMINATIONS
HARD-CELL FOAM INSULATION
RM1,999.00 -
Audioquest Golden Gate RCA-RCA Interconnect Cable 1.5m
Price per Pair – 1.5 metre
Free Delivery (West Malaysia Only)
Audioquest – Golden Gate
RCA-RCA Interlink Cable
Analog-Audio Interconnect Cable named after the Golden Gate Bridge in San Francisco, which was once the longest suspension bridge in the world.
In all Bridges & Falls, you’ll find better metals and more sophisticated technologies — including Air-Tube insulation, Dielectric-Bias System, and Noise-Dissipation System — at lower prices than ever before.
Note: All cables in our Bridges & Falls Series place their left and right channels in a single jacket, and feature our Asymmetrical Double-Balanced geometry with separate high-quality positive and negative conductors. This design allows for a thin, flexible, and uniquely versatile high-performance cable that can be terminated with a variety of today’s connections, including 3.5mm (male or female), DIN, and RCA. Do keep in mind, however, that, by necessity, the plugs on Bridges & Falls cables are fairly close together. If the L and R inputs of your components are more than 3″ (7.6cm) apart, please consider models from our Rivers or Elements Series.
RM599.00 -
Audioquest Evergreen RCA-RCA Interconnect Cable 1.5m
Price per Pair – 1.5 metre
Free Delivery (West Malaysia Only)
Audioquest – Evergreen
RCA-RCA Interlink Cable
Analog-Audio Interconnect Cable named after the Evergreen Bridge that connects Seattle, Washington (USA) to the Bellevue area across Lake Washington.
In all Bridges & Falls, you’ll find better metals and more sophisticated technologies — including Air-Tube insulation, Dielectric-Bias System, and Noise-Dissipation System — at lower prices than ever before.
Note: All cables in our Bridges & Falls Series place their left and right channels in a single jacket, and feature our Asymmetrical Double-Balanced geometry with separate high-quality positive and negative conductors. This design allows for a thin, flexible, and uniquely versatile high-performance cable that can be terminated with a variety of today’s connections, including 3.5mm (male or female), DIN, and RCA. Do keep in mind, however, that, by necessity, the plugs on Bridges & Falls cables are fairly close together. If the L and R inputs of your components are more than 3″ (7.6cm) apart, please consider models from our Rivers or Elements Series.
RM399.00 -
Audioquest Tower 5.5mm Jack-RCA Interconnect Cable 1.5m
Price per Pair – 1.5 metre
Free Delivery (West Malaysia Only)
Audioquest – Tower
3.5mm Jack-RCA Interlink Cable
Analog-Audio Interconnect Cable named after the Tower Bridge in London.
In all Bridges & Falls, you’ll find better metals and more sophisticated technologies including Air-Tube insulation, Dielectric-Bias System, and Noise-Dissipation System at lower prices than ever before.
Note: All cables in our Bridges & Falls Series place their left and right channels in a single jacket, and feature our Asymmetrical Double-Balanced geometry with separate high-quality positive and negative conductors. This design allows for a thin, flexible, and uniquely versatile high-performance cable that can be terminated with a variety of today’s connections, including 3.5mm (male or female), DIN, and RCA.
RM269.00 -
Audioquest Tower RCA-RCA Interconnect Cable 1.5m
Price per Pair – 1.5 metre
Free Delivery (West Malaysia Only)
Audioquest – Tower
RCA-RCA Interlink Cable
Analog-Audio Interconnect Cable named after the Tower Bridge in London.
In all Bridges & Falls, you’ll find better metals and more sophisticated technologies including Air-Tube insulation, Dielectric-Bias System, and Noise-Dissipation System at lower prices than ever before.
Note: All cables in our Bridges & Falls Series place their left and right channels in a single jacket, and feature our Asymmetrical Double-Balanced geometry with separate high-quality positive and negative conductors. This design allows for a thin, flexible, and uniquely versatile high-performance cable that can be terminated with a variety of today’s connections, including 3.5mm (male or female), DIN, and RCA.
RM269.00 -
RM3,099.00
KLIPSCH R-51-RM Active Bookshelf Monitor
RM3,099.00 -
SVS PB-2000 Pro Active Subwoofer
Price per piece
Free Delivery (West Malaysia Only)
Active Subwoofer – Black Ash
Breathtaking output and subterranean low frequency extension down to 16 Hz with astonishing detail and accuracy. PB-2000 Pro features all-new 12-inch high-excursion SVS driver and 550 watts RMS, 1,500+ watts peak power Sledge STA-550D amplifier with fully discrete MOSFET output. Harnessing the massive power while ensuring unerring control and room-energizing bass response is a 50 MHz Analog Devices Audio DSP. PB-2000 Pro also features the SVS subwoofer smartphone app for convenient control of volume, DSP functions, custom presets and more.
Features :
- 12″ Front-Firing High Excursion Driver
- Sledge STA-550D Amplifier – 550 watts
- PB-100 Pro Smartphone App – via Bluetooth
- Line Level & Speaker Level inputs
- Rear-panel SVS Intelligent Control Interface
- Black Ash Finish
Specifications :
Type Active Subwoofer – Bass-Reflex via Dual Front-firing ports
Amplifier Power 550 watts
Amplifier Features Class D / Fully Discrete MOSFETS
Speaker driver 12” SVS high excursion driver
Frequency response 16Hz – 290Hz (+/- 3dB)
Weight 29.4 kg
Dimensions 20.9” x 17.3” x 23.6 “ (H x W x D)
RM5,499.00SVS PB-2000 Pro Active Subwoofer
RM5,499.00 -
SVS PB-1000 Pro Active Subwoofer
Price per piece
Free Delivery (West Malaysia Only)
Active Subwoofer – Black Ash
The original SVS PB-1000 rocked the subwoofer world with unparalleled performance at its price and beyond. Now, the PB-1000 Pro raises the bar even higher with greater low frequency output, deeper bass extension down to a guttural 17Hz, performance-enhancing dual port cabinet design, and a massive upgrade to the user experience.
A complete reimagination of the original 10-inch driver, the PB-1000 Pro features an all-new 12-inch high-excursion driver with dual high-grade ferrite magnets and FEA-optimized internal motor architecture for extreme excursion and massive, pristine output. With innovations to the cone, surround, voice coil, and motor assembly, the unflappable 12-inch driver unleashes room-shaking bass never-before-heard from a ported subwoofer anywhere near the price.
Features :
- 12″ Front-Firing High Excursion Driver
- Sledge STA-325D Amplifier – 325 watts
- PB-100 Pro Smartphone App – via Bluetooth
- Line Level & Speaker Level inputs
- Rear-panel SVS Intelligent Control Interface
- Black Ash Finish
Specifications :
Type Active Subwoofer – Bass-Reflex via Dual Front-firing ports
Amplifier Power 325 watts
Amplifier Features Class D / Fully Discrete MOSFETS
Speaker driver 12” SVS high excursion driver
Frequency response 17Hz – 260Hz (+/- 3dB)
Weight 19.3 kg
Dimensions 18.9” x 15” x 20 “ (H x W x D)
RM4,099.00SVS PB-1000 Pro Active Subwoofer
RM4,099.00 -
SVS Sound Path (6) (Subwoofer Isolation System)
Price per Pack (6 pieces)
Free Delivery (West Malaysia Only)
Subwoofer Isolation System
The SVS SoundPath Subwoofer Isolation System works with nearly every subwoofer brand and model to improve bass performance while reducing floor and wall vibrations, noise artifacts and complaints from neighbors or roommates. De-coupling a subwoofer from the floor results in inherently tighter and cleaner sounding bass. It’s also the next best thing to sound-proofing and ideal for carpeted rooms, hardwood floors or any space where room rattles, buzzes or vibrations are present.
De-coupling
Decoupling is making the interaction between a subwoofer and floor so weak that virtually no energy is transferred between them. The SVS SoundPath Subwoofer Isolation System features rigorously tested optimized durometer elastomer feet that significantly reduces the transmission of subwoofer energy through your floor and walls. This allows low frequency effects to be transferred through the air where they can be felt, resulting in tighter and cleaner sounding bass, no more distracting buzz or rattle from the room, and better sonic clarity and dynamics.
The SVS SoundPath Subwoofer Isolation System feet come in a variety of thread sizes that easily screw into most subwoofer’s existing threaded inserts and subtly elevate the sub enclosure on a cushion of elastomer encased in stainless steel. The understated feet are a stylish, more effective alternative to bulky risers and platforms, at a fraction of the cost and also work with some turntables and other components.
RM420.00 -
SVS Sound Path (4) (Subwoofer Isolation System)
Price per Pack (4 pieces)
Free Delivery (West Malaysia Only)
Subwoofer Isolation System
The SVS SoundPath Subwoofer Isolation System works with nearly every subwoofer brand and model to improve bass performance while reducing floor and wall vibrations, noise artifacts and complaints from neighbors or roommates. De-coupling a subwoofer from the floor results in inherently tighter and cleaner sounding bass. It’s also the next best thing to sound-proofing and ideal for carpeted rooms, hardwood floors or any space where room rattles, buzzes or vibrations are present.
De-coupling
Decoupling is making the interaction between a subwoofer and floor so weak that virtually no energy is transferred between them. The SVS SoundPath Subwoofer Isolation System features rigorously tested optimized durometer elastomer feet that significantly reduces the transmission of subwoofer energy through your floor and walls. This allows low frequency effects to be transferred through the air where they can be felt, resulting in tighter and cleaner sounding bass, no more distracting buzz or rattle from the room, and better sonic clarity and dynamics.
The SVS SoundPath Subwoofer Isolation System feet come in a variety of thread sizes that easily screw into most subwoofer’s existing threaded inserts and subtly elevate the sub enclosure on a cushion of elastomer encased in stainless steel. The understated feet are a stylish, more effective alternative to bulky risers and platforms, at a fraction of the cost and also work with some turntables and other components.
RM330.00 -
FIBBR Ultra Pro 2 – (Fibre Optic HDMI Cable)
Price per Piece – 15 metre
Free Delivery (West Malaysia Only)
Fiber Optic HDMI Cable – 21 Gbps / 4K / HDR
Reliably high 18Gbps bandwidth and 4K@60FPS with
HDR Extremely low signal attenuation, and high resistance to external electromagnetic interference & all necessary features for future, higher-definition developments.
Fiber is strong but lightweight & 60% lighter than traditional cabling and flexible
Plug and play, no external power needed.
Easy-to-use Connect-Light and Smart Status Indicator
SPECIFICATION
- Ultra Pro HDMI 2.0 AOC
- Product Type: HDMI 2.0
- Product Specification: 4:4:4 4K@60Hz
- Product Length: 15 m
- Cable Diameter: 4.6 mm
- Material: 4-core optical fiber cable
- Product Model: F-H2P Pro2 15
- Bandwidth: 21 Gbps
- Housing: PC material
- Power Supply: no external power supply needed
- Braided Coating: PET
RM1,290.00FIBBR Ultra Pro 2 – (Fibre Optic HDMI Cable)
RM1,290.00